Skip to main content

Wire TU 14-4-1566-89

Carbon wire for ribbed mesh TU 14-4-1566-89
Rating: 4.5 Votes: 6
$1380
TU 14-4-1566-89
In stock

Carbon wire for ribbed mesh of TU 14-4-1566-89

Carbon wire of Technical Conditions TU 14-4-1566-89 for manufacturing of ribbed mesh is made from 1,0 to 6,0 in diameter uncoated. TU 14-4-1566-89 carbon wire for ribbed mesh is produced of class 1 and class 2 according to mechanical properties.

Supply of TU 14-4-1566-89 wire for ribbed mesh

Carbon wire for manufacturing of ribbed TU 14-4-1566-89 mesh is supplied in different ways depending on the diameter. Wire 1,0 to 1,3 mm in diameter is supplied in coils 80 kg each, in Z2 or Z2S reels, and wire 1,2-3,0 mm in diameter – in coils up to 170 kg, in Z2 or Z2S reels, and wire 2,0-8,0 mm in diameter is shipped in 100-150 kg coils or reels up to 1000 kg. Wire for ribbed mesh of TU 14-4-1566-89 is covered with preservation oil for protection against rust and papered and after that – covered with film.

Mechanical properties of TU 14-4-1566-89 carbon wire

Wire diameter, mm Tensile strength, N/mm2 Nip quantity, not less Kink quantity, not less
Class 1 Class 2 Class 1 Class 2
1,1 1370 - 1700 (140 - 173) 20 20 26 17
1,2 17 17 26 17
1,25 12 10 26 17
1,3 12 10 26 17
1,4 12 10 26 17
1,5 12 10 26 17
1,6 1270 - 1570 (130 - 160) 17 15 26 17
1,8 14 13 26 17
2,0 12 11 26 16
2,2 19 17 24 15
2,5 19 17 24 15
2,8 11 10 22 13
3,0 11 10 20 13
3,15 18 16 20 13
3,2 18 16 19 13
3,4 1180 - 1470 (120 - 150) 16 15 19 13
3,6 11 9 19 13
4,0 8 7 15 13
4,2 15 14 15 2
4,5 13 11 15 12
5,0 1080 - 1370 (110 - 140) 11 9 12 9
5,6 6 6 10 6
6,0 6 6 8 4